A departure board for home
The railway. Reimagined.
A little piece of Britain’s railway stations, brought into your home: a real LED departure board that shows the live trains from your station.
Rendered from the case’s own design files. Its screen is running the board’s own software, live in your browser.
Up close
An icon of the station.
Reimagined for home.
The same three lines you know from the platform: the next train, where it calls, and what’s after it.
The pixels
Every pixel
has a purpose.
Each letter is drawn by hand, one dot at a time, in a typeface made for this board. These are its real messages, scrolling past.
Three panels
Three panels.
One display.
Panel 1
64 × 32
2,048 LEDs
Panel 2
64 × 32
2,048 LEDs
Panel 3
64 × 32
2,048 LEDs
64 + 64 + 64 = 192 × 32
Three panels, chained together, work as one wide screen, redrawn 40 times a second. Hover over a panel to pick it out.
How it works
The board from the platform, on your wall.
No app to open, nothing to check. Glance up and you know when your next train leaves, and whether it’s on time.
Hang it up
Two keyholes on the back hold it flat against the wall. Plug it in and it switches on.
Connect it
The first time, it makes its own WiFi network. Join it on your phone and follow the page that opens to put it on your WiFi.
Choose your station
Any of 2,589 National Rail stations, or 272 on the London Underground. From then on, it shows the next trains.
Live, all day
Times, platforms, delays and cancellations from National Rail’s own live feed, updated every minute.
Your commute, followed
Tell it your daily journey and it follows your trains, changes included, before you set off.
Made to live with
Five LED colours, Christmas and Halloween themes, and a night mode that dims or switches it off.
Try it
The board comes alive.
Pick a situation below and watch the board handle it. It’s the board’s own software, running in your browser.
Everything running normally. The next train is on top, the stations it calls at scroll past underneath, and the trains after it take turns with the clock.
- 1The next train: time, platform, where it’s going, and whether it’s on time
- 2Where it stops, then any news about it, scrolling past
- 3The trains after it, and the clock, taking turns
Customise the boardColours, themes and settings, as an owner would
Colour
What it shows
Once a year
The engineering
Designed from the ground up.
I wanted to bring the iconic British railway departure board into people’s homes. So I designed it from scratch: I assembled the three LED panels, wrote the software, drew the station font dot by dot and designed the 3D-printed case.
- Case
- 779 × 136 × 63 mm
- Display
- 192 × 32 dots
- Parts printed
- 10
- Software
- v1.6.2
01 · The display
Three panels. One railway experience.
Three 64 × 32 RGB LED matrix panels, butted edge to edge, make one 768 × 128 mm display: 6,144 LEDs, each one switched on and off individually.
- Per panel
- 64 × 32 · 2,048 LEDs
- Pitch
- 4 mm (P4)
- Refresh
- 40 frames a second
- Colours
- 7, including 2 themes
02 · The enclosure
A case built around the panels.
Ten 3D-printed parts in matte black PLA. The panels slide in from the front and bolt to a ledge from behind, so nothing presses on an LED. Bolted frames at every joint and four back covers tie it together.
- Weight
- 2.1 kg complete
- Brass inserts
- 52
- Printing
- about 30 hours
- Hangs
- flat, on two keyholes
03 · The electronics
A Raspberry Pi behind the panels.
A Raspberry Pi 5 with Adafruit’s Triple LED Matrix Bonnet sits on a printed bridge right beside the first panel, so it can all be wired and tested before the back goes on. Power plugs into a recessed bay, so the cable stays inside the outline and the board hangs flat.
- Computer
- Raspberry Pi 5
- Driver
- Adafruit Triple Bonnet
- Power in
- recessed socket bay
- Cooling
- 51 cm² of vent slots
04 · The software
Real hardware. Custom software. A love of the railway.
Written from scratch. It fetches live departures from National Rail every minute and Tube arrivals from TfL, rides out internet blips, and checks every frame so the panels never draw more power than the supply can give.
- Live data
- National Rail · TfL
- Updates
- every 60 s (Tube: 30 s)
- Extras
- journey planner, night dimming
- Font
- Station, drawn by hand
At a glance
The specs.
- Size
- 779 × 136 × 63 mm
- Weight
- 2.1 kg
- Display
- 192 × 32 LEDs, on three 64 × 32 RGB LED matrix panels
- LED pitch
- 4 mm (P4)
- Colours
- Amber, yellow, white, green or orange, plus Christmas and Halloween themes
- Live data
- National Rail departures (every minute) and London Underground arrivals (every 30 seconds)
- Shows
- Times, platforms, delays, cancellations, calling points, station messages, the clock
- Connection
- WiFi
- Mounting
- Hangs flat on a wall, on two keyholes
- Power
- Plugs into a recessed socket on the back
- Night mode
- Dims or switches off between times you choose
- Case
- Ten parts, 3D-printed in matte black PLA, with brass inserts
Questions
Good to know.
Are the train times real?
Yes. They come from National Rail’s live departure data, the same source as the boards at stations, and update every minute. Underground arrivals come from Transport for London.
Which stations does it work with?
Every National Rail station in Great Britain (2,589 of them) and all 272 London Underground stations. You can also show just one platform.
Do I need a computer or an app?
No. A small computer inside runs it. You set it up once from your phone’s web browser, and after that it looks after itself.
What does it need?
A wall socket, your WiFi, and a free train-times key from the Rail Data Marketplace, which you enter once during setup.
What if the internet drops?
It keeps showing the last good departures for up to ten minutes, says so if it can’t connect, and carries on by itself when the connection comes back.
Will it light up the room at night?
Not unless you want it to. Night mode dims it or turns it off between the times you choose.
Can I buy one?
Yes. Press Buy now on the product page to pay securely by card, Apple Pay or Google Pay. Each board is built and tested by hand once you order.
How long does delivery take?
Up to two weeks, and it’s free anywhere in the UK. The checkout shows the latest date it will arrive. If you change your mind, you have 14 days after it arrives to send it back for a full refund.

The real prototype
The finished product
Bring the railway home.
A real departure board for your hallway, kitchen or desk. Choose your station once and it shows the trains, live, all day.
Free UK delivery within 2 weeks · 12-month warranty · 14-day returns
